New Jersey Geological Survey Hydro Database

Metadata also available as

Metadata:


Identification_Information:
Citation:
Citation_Information:
Originator:
Department of Environmental Protection (NJDEP), Division of Land Use Management, New Jersey Geological Survey (NJGS), William J. Mennel, Robert Canace (ed.)
Publication_Date: 20020101
Title: New Jersey Geological Survey Hydro Database
Edition: 6.0 (2012)
Geospatial_Data_Presentation_Form: tabular digital data
Series_Information:
Series_Name: DGS02-1
Publication_Information:
Publication_Place: Trenton, New Jersey
Publisher: New Jersey Geological Survey
Online_Linkage: <http://www.state.nj.us/dep/njgs/geodata/dgs02-1.zip>
Description:
Abstract:
The NJGS hydrologic properties database is a compilation of values for the hydrologic properties of geologic materials in New Jersey. The Microsoft (MS) Access97 database (hydro.mdb) includes values derived from the analysis of aquifer pumping tests, in-situ hydrologic testing such as slug injection and removal tests, lab permeameter tests, etc. The compilation is ongoing. Values are added on a regular basis as tests are analyzed and quality control is completed. The data are intended to be used for characterization of the hydrogeologic properties of individual geologic and hydrogeologic units throughout the state. Applications include prediction of hydrologic impacts of ground-water extraction, analysis of the sustainable yield of water supply wells, the rate of movement of ground-water contaminants through aquifers, etc. All data entered into the database have been examined or generated by an NJGS hydrogeologist. Quality control measures include a critical evaluation of the source of the data, the quality of the data, the testing methodology used, the appropriateness of the analytical method used relative to the hydrogeologic setting in which the testing occurred, among other considerations.
This publication originally included the look up table "hydroref" which has been removed from here and is now being published as the Hydrogeologic Nomenclature Reference Table (DGS05-3).
Purpose:
The data are intended for use in characterization of the hydrologic properties of individual geologic and hydrogeologic units throughout the state.
Supplemental_Information:
Data is compiled from reports by the U.S. Geological Survey, Water Resources Division, hydrogeologic reports submitted to NJDEP in compliance with regulations governing application for major water-supply-diversion permits, technical reports submitted to the NJDEP Site Remediation program for regulatory compliance with hazardous site characterization, miscellaneous hydrogeologic investigations, field studies conducted by NJGS, and other legitimate sources. The database contains values from all areas of the state. Values are obtained on an "as available" basis, so some geographic areas and geologic units are better represented in the data.
Each data set is referenced to its source, which may be a formal publication by the NJGS, USGS, or other agency or individual, or an informal report by the individual or entity that performed the test. The report title is contained in a database field, although the report name may be abbreviated; many report names were of excessive length. The report reference is accompanied by a report reference number, which is the number assigned by the entity generated the report. This may be a number referring to a formal report series (e.g. New Jersey Geological Survey Open-File Report 99-999), or a tracking number used by an entity for internal purposes. The purpose of including such tracking numbers is to be able to find the report within the files of the generating entity to obtain original data.
A paper companion file is maintained at the offices of the New Jersey Geological Survey, 29 Arctic Parkway, Ewing, New Jersey, for nearly all database entries. The companion file typically contains essential excerpts from the test report, including site maps, well records, and discussions of testing methodology and analysis. Original data files are maintained on a computer disk. NJGS analyses of test results are also included in the files. Files can be reviewed by contacting Jim Boyle, Research Scientist, at 609-984-6587, by appointment.
Time_Period_of_Content:
Time_Period_Information:
Single_Date/Time:
Calendar_Date: 20120127
Currentness_Reference: publication date
Status:
Progress: Complete
Maintenance_and_Update_Frequency: As needed
Spatial_Domain:
Bounding_Coordinates:
West_Bounding_Coordinate: -75.37
East_Bounding_Coordinate: -73.99
North_Bounding_Coordinate: 41.18
South_Bounding_Coordinate: 38.94
Keywords:
Theme:
Theme_Keyword_Thesaurus: none
Theme_Keyword: aquifers
Theme_Keyword: groundwater
Theme_Keyword: hydrogeologic
Theme_Keyword: geologic
Theme_Keyword: transmissivity
Theme_Keyword: conductivity
Theme_Keyword: storativity
Theme_Keyword: porosity
Place:
Place_Keyword_Thesaurus: none
Place_Keyword: New Jersey
Temporal:
Temporal_Keyword_Thesaurus: none
Temporal_Keyword: none
Access_Constraints: none
Use_Constraints:
New Jersey Department of Environmental Protection (NJDEP) Data Distribution Agreement
I. Description of Data to be Provided.
The data provided herein are distributed subject to the following conditions and restrictions.
SUBJECT DATA LAYERS
For all data contained herein, NJDEP makes no representations of any kind, including, but not limited to, the warranties of merchantability or fitness for a particular use, nor are any such warranties to be implied with respect to the digital data layers furnished hereunder. NJDEP assumes no responsibility to maintain them in any manner or form.
II. Terms of Agreement
1. Digital data received from the NJDEP are to be used solely for internal purposes in the conduct of daily affairs.
2. The data are provided, as is, without warranty of any kind and the user is responsible for understanding the accuracy limitations of all digital data layers provided herein. Any reproduction or manipulation of the above data must ensure that the coordinate reference system remains intact.
3. Digital data received from the NJDEP may not be reproduced or redistributed for use by anyone without first obtaining written permission from the NJDEP. This clause is not intended to restrict distribution of printed mapped information produced from the digital data.
4. Any maps, publications, reports, or other documents produced as a result of this project that utilize NJDEP digital data will credit the NJDEP's Geographic Information System (GIS) as the source of the data with the following credit/disclaimer:
"This (map/publication/report) was developed using New Jersey Department of Environmental Protection Geographic Information System digital data, but this secondary product has not been verified by NJDEP and is not state-authorized."
5. Users shall require any independent contractor, hired to undertake work that will utilize digital data obtained from the NJDEP, to agree not to use, reproduce, or redistribute NJDEP GIS data for any purpose other than the specified contractual work. All copies of NJDEP GIS data utilized by an independent contractor will be required to be returned to the original user at the close of such contractual work.
Users hereby agree to abide by the use and reproduction conditions specified above and agree to hold any independent contractor to the same terms. By using data provided herein, the user acknowledges that terms and conditions have been read and that the user is bound by these criteria.
Point_of_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: William Mennel
Contact_Organization: New Jersey Geological Survey
Contact_Voice_Telephone: (609) 984-6587
Contact_Facsimile_Telephone: (609) 633-1004
Contact_Electronic_Mail_Address: Bill.Mennel@dep.nj.gov
Browse_Graphic:
Browse_Graphic_File_Name: dgs02-1.jpg
Browse_Graphic_File_Description: none
Browse_Graphic_File_Type: JPEG

Data_Quality_Information:
Attribute_Accuracy:
Attribute_Accuracy_Report:
Data accuracy is a function of the methods used to collect data. Typically data is collected using automatic data recorders. Water level measurements are typically accurate to the nearest 0.10 feet or better. Data analysis is quantitative, subject to analysis of best fit to accepted analytical models, and the product of some degree of subjective evaluation by a qualified hydrogeologist. Data is rejected if the test conditions would not result in a reasonably meaningful value for the hydrologic properties of the hydrogeologic unit. This screening mechanism includes satisfying the following criteria: the physical setting of the test has been adequately documented; sufficient information is available to determine the location and frequency at which data was collected during testing; subsurface information on the depth of wells and the lithologic characteristics of the geologic units present is sufficient to define the relationship between points of observation to determine if they will yield properties for the unit of interest; background perturbations in water levels caused by natural cycles or external pumping can be accounted for or filtered from test data; the analytical or numerical model used in analysis of the data is designed for or suitable for the hydrogeologic conditions existing at the test site; there is a reasonable correlation between observed and modeled results; the output of the solution model is reasonable results in a regression error between observed and simulated outcomes.
Lineage:
Process_Step:
Process_Date: 20020101
Process_Step:
Process_Description: Added 32 well test data.
Process_Date: 20120127

Spatial_Data_Organization_Information:
Direct_Spatial_Reference_Method: Point
Point_and_Vector_Object_Information:
SDTS_Terms_Description:
SDTS_Point_and_Vector_Object_Type: Point
Point_and_Vector_Object_Count: 283

Spatial_Reference_Information:
Horizontal_Coordinate_System_Definition:
Planar:
Grid_Coordinate_System:
Grid_Coordinate_System_Name: State Plane Coordinate System
State_Plane_Coordinate_System:
SPCS_Zone_Identifier: 2900
Transverse_Mercator:
Scale_Factor_at_Central_Meridian: .999975
Longitude_of_Central_Meridian: -74.30
Latitude_of_Projection_Origin: 38.50
False_Easting: 492,125.98
False_Northing: 0
Planar_Coordinate_Information:
Planar_Coordinate_Encoding_Method: coordinate pair
Coordinate_Representation:
Planar_Distance_Units: Feet
Geodetic_Model:
Horizontal_Datum_Name: North American Datum of 1983
Ellipsoid_Name: GRS 80
Semi-major_Axis: 6378137.0 m
Denominator_of_Flattening_Ratio: 298.257222101

Entity_and_Attribute_Information:
Detailed_Description:
Entity_Type:
Entity_Type_Label: Hydro.mdb
Entity_Type_Definition:
The characterization of the hydrogeologic properties of individual geologic and hydrogeologic units throughout the state.
Entity_Type_Definition_Source: NJGS
Attribute:
Attribute_Label: filenum
Attribute_Definition:
NJGS File Number - The number assigned to the paper file containing the subject aquifer test data. File numbers are assigned out by the data-entry person prior to entering records into the database. The file includes all test data (digital format, when available) and related information (i.e. geologic cross-sections, well logs, site map, etc.) for the hydrologic test performed
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: refnum
Attribute_Definition:
Report Reference Number - A number of a formal report in a series (e.g. NJGS Open-File Report 99-999), or a tracking number assigned to the report by the entity generating the report for internal filing purposes.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: reviewer
Attribute_Definition:
Reviewer's Last Name - The name of the person who evaluated the data and derived the values entered into the database. This field consists of the first initial of the person's first name, followed by the last name or first seven letters of the last name, whichever is less.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: author
Attribute_Definition:
Report Author - The name of the author of a report from which the hydrologic test data was derived. In some cases this may consist of the name of an entity that produced the report (e.g. Woodward Clyde Associates).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: title
Attribute_Definition:
Report Title - The tile of the report, if any, from which the data for the analysis was obtained.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: year
Attribute_Definition:
Report Year - The reported year of publication of the referenced data.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: bwaprmt
Attribute_Definition:
Bureau of Water Allocation (BWA) Permit Number - A permit number assigned to a water use by the Bureau of Water Allocation. Wells that have been assigned an Allocation Permit pump at 70 gallons per minute (gpm) or 100,000 gallons per day (gpd).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: pwprmt
Attribute_Definition:
Pumping Well Permit Number - A permit number assigned by the Bureau of Water Allocation to a well. The first two digits represent the 1:63,360 topographic atlas sheet map on which the well is located. The remaining five digits are assigned to wells consecutively as permits are approved. This field has the following format: ##-##### (e.g. 28-14536, 24-06231, 21-00005, etc.)
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: pwname
Attribute_Definition:
Pumping Well Name - The name the owner assigns to the pumping well, or a name assigned by the reviewer. Examples include a street address (e.g. Lakeland Avenue well), a well number (e.g. well 1), or a geologic unit name (e.g. Kirkwood well). These names are often repeated within the same well field and should only be used where the name can be confirmed.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: owprmt
Attribute_Definition:
Observation Well Permit Number - A permit number assigned by the Bureau of Water Allocation to a well. The first two digits represent the 1:63,360 topographic atlas sheet map on which the well is located. The remaining five digits are assigned to wells consecutively as permits are approved. This field has the following format: ##-##### (e.g. 28-14536, 24-06231, 21-00005, etc.).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: owname
Attribute_Definition:
Observation Well Name - The name the owner assigns to the observation well, or a name assigned by the reviewer. Examples include a pre-existing well name (e.g. production well 2), a number (e.g. observation well 1), a location (Maple Park well), or the well construction (e.g. shallow well, deep well, piezometer).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: sitename
Attribute_Definition:
Site Name - A formal or informal name applied to the location where testing was conducted. For example, "Flanders Well Field," "Monroe Landfill Site," etc. The reviewer assigns the name.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: fipsnum
Attribute_Definition:
Municipality - An identifying number assigned to the municipality in which the well is located. The first two digits represent the county and the last three the municipality in which the test occurred (e.g. 41080). Leading and trailing zeros must be included where appropriate (e.g. 01010). The codes for this field are listed in the lookup table "mun-name".
Attribute:
Attribute_Label: quadnum
Attribute_Definition:
Quadrangle - A three-digit code assigned by NJGS to the U.S. Geological Survey 1:24,000 7.5-minute topographic quadrangle map covering the area in which the well is located. Leading zeros must be included where appropriate (e.g. 015). The codes for this field are listed in the lookup table "quadloc".
Attribute:
Attribute_Label: lon
Attribute_Definition:
Longitude - The numeric value representing the longitude of the test location or a specific well at the location (e.g. observation well for which the data were used). This value is given in NAD27. The format for this field is "ddmmss.ss", where "dd" represents the degrees, "mm" represents the minutes, and "ss.ss" represents the seconds and decimal seconds of the well or site's location. Leading zeros must be included where appropriate (e.g. 712234.87).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: lat
Attribute_Definition:
Latitude - The numeric value representing the latitude of the test location or a specific well at the location (e.g. observation well for which the data were used). This value is given in NAD27. The format for this field is "ddmmss.ss", where "dd" represents the degrees, "mm" represents the minutes, and "ss.ss" represents the seconds and decimal seconds of the well or site's location. Leading zeros must be included where appropriate (e.g. 425167.89).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: north
Attribute_Definition:
Northing - The coordinate, in state plane feet north or an origin of reference, of the test location or a specific well at the location (e.g. observation well for which the data were used). This value is given in NAD83. The numeric format used is ######.## (e.g. 383275.89).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: east
Attribute_Definition:
Easting - The coordinate, in state plane feet north or an origin of reference, of the test location or a specific well at the location (e.g. observation well for which the data were used). This value is given in NAD 83. The numeric format used is ######.## (e.g. 724311.65).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: locmeth
Attribute_Definition:
Method of Location - A single character code representing the method used for determining the location of the well. The codes for this field are listed in the lookup table "loc-meth".
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: location
Attribute_Definition:
Located Point - A description of the specific location to which the spatial coordinates have been assigned. Examples include a well house, a well, a street address, a centroid of a facility, etc.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: njgs_id
Attribute_Definition:
NJGS Id - A unique number assigned by the NJ Geological Survey which describes a one to on relationship between a hydrogeologic unit and a geologic unit. The codes in this field are listed in the NJ Geological Survey Hydrogeologic Reference Database (DGS05-3)
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: geonum
Attribute_Definition:
Geonum - Geological or geo-chronological unit number. A four digit number assigned by NJ Geological Survey staff to a stratigraphic, geo-chronological, or generic geological unit mapped or cataloged by the NJ Geological Survey for database administration purposes. The codes for this field are listed in the lookup table "geotable" which was extracted from the NJ Geological Survey Hydrogeologic Reference Database (DGS05-3).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: hydronum
Attribute_Definition:
Hydronum - Hydrogeologic unit number. A random number assigned to a formal or informal hydrogeologic unit. The number sequence tends to reflect the stratigraphic sequence of the geologic units that make up the hydrogeologic unit, but not strickly. The codes for this field are listed in the lookup table "hydtable" which was extracted from the NJ Geological Survey Hydrogeologic Reference Database (DGS05-3).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: thick
Attribute_Definition:
Thickness of Unit - The saturated thickness of the hydrologic unit that is being evaluated. Units for this field are in feet. Format is ####.# (e.g. 121.5)
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: testdate
Attribute_Definition:
Date of Test - The date the test was initiated. Leading zeros must be used where appropriate. The following format should be used when entering data into this field: ##/##/#### (e.g. 01/12/2001).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: testlen
Attribute_Definition:
Length of Test - The duration of the test used to measure the hydrologic parameters. Units for this field are in minutes.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: testtype
Attribute_Definition:
Test - A two-character code which identifies the type of test that was performed to derive the hydrologic properties in this record. The codes for this field are listed in the lookup table "testtype". This is followed by a field allowing a written description of the type of test performed (e.g. aquifer drawdown test).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: pwrate
Attribute_Definition:
Discharge Rate - The discharge rate from a pumping well during an aquifer test reported in gallons per minute (gpm).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: method
Attribute_Definition:
Method - A three-digit code which represents the analytic method that was used to derive hydrologic properties for the site. The codes for this field are listed in the lookup table "testmeth". This is followed by a field allowing a written description of the method of analysis performed (e.g. Theis method for confined aquifers).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: trans
Attribute_Definition:
Transmissivity - The transmissivity of the hydrogeologic unit that is being evaluated. Units for this field are in feet squared per day.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: stor
Attribute_Definition:
Storativity - The storativity of the hydrologic unit that is being described. This field is dimensionless and units are less than one (1).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: horizk
Attribute_Definition:
Horizonatal Conductivity - The hydraulic conductivity of the hydrogeologic unit that is being evaluated in the horizontal (XY) plane. Units for this field are in feet per day.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: vertk
Attribute_Definition:
Vertical Conductivity - The hydraulic conductivity of the hydrogeologic unit being evaluated in the vertical (Z) plane. Units for this field are in feet per day.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: specyld
Attribute_Definition:
Specific Yield - The specific yield of an unconfined aquifer. This parameter is dimensionless.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: leakance
Attribute_Definition:
Leakance - The leakance value of a semi-confining unit. Units for this field are per day.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: leakfact
Attribute_Definition:
Leakage Factor - The leakage factor of a semi-confining unit. Units for this field are in feet per foot.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: eporo
Attribute_Definition:
Effective Porosity - The effective porosity for the hydrogeologic unit being evaluated. This field is dimensionless and values are less than one (1).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: tporo
Attribute_Definition:
Total Porosity - The porosity for the hydrogeologic unit that is being evaluated. This field is dimensionless and values are less than one (1).
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: tmajax
Attribute_Definition:
Transmissivity Major Axis - The transmissivity along the major axis in an anisotropic aquifer. Units for this field are feet squared per day.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: tminax
Attribute_Definition:
Transmissivity Minor Axis - The transmissivity along the minor axis in an anisotropic aquifer. Units for this field are in feet squared per day.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: azmajax
Attribute_Definition:
Azimuth Major Axis - The azimuth of the major axis in an anisotropic aquifer. The convention for assigning azimuth is clockwise, with north representing 0 degrees and south representing 180 degrees. The units for this field are degrees. Values range from 0 to 359 degrees.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: flag
Attribute_Definition:
Active / Inactive - A flag used to de-activate individual files that may require re-examination and need to be temporarily excluded from the database statistical summary. The test is maintained in the database so that it can be tracked to the companion paper file containing information about the test site and test.
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: comments
Attribute_Definition:
Comments - Any relevant information the reviewer thinks should be included to better characterize the report from which the data was derived, regulatory information, more specific information about the location, additional information on the testing method or analysis, or other relevant information. Could include documents or images attached to the file or by reference
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: aqtype
Attribute_Definition:
Aquifer Type - A single character designation for the type of aquifer in which the test was run. The codes for this field are listed in the lookup table "aqtype".
Attribute_Definition_Source: NJGS
Attribute:
Attribute_Label: zonenum
Attribute_Definition:
Zonenum - Aquifer zone number. A random number assigned to a formal or informal water-bearing zone. The codes for this field are listed in the lookup table "zonenum" which was extracted from the NJ Geological Survey Reference Database (DGS05-3).
Attribute_Definition_Source: NJGS

Distribution_Information:
Distributor:
Contact_Information:
Contact_Person_Primary:
Contact_Person: William Mennel
Contact_Organization: New Jersey Geological Survey
Contact_Address:
Address_Type: mailing address
Address: PO Box 420, Mail Code 29-01
City: Trenton
State_or_Province: New Jersey
Postal_Code: 08625-0420
Contact_Voice_Telephone: (609) 984-6587
Contact_Facsimile_Telephone: (609) 633-1004
Contact_Electronic_Mail_Address: Bill.Mennel@dep.nj.gov
Resource_Description: Mennel, W.J., Canace, R., 2000, NJGS Hydro Database: N.J.
Distribution_Liability:
For all data contained herein, NJDEP makes no representations of any kind, including, but not limited to, the warranties of merchantability or fitness for a particular use, nor are any such warranties to be implied with respect to the digital data layers furnished hereunder. NJDEP assumes no responsibility to maintain them in any manner or form.
Standard_Order_Process:
Digital_Form:
Digital_Transfer_Information:
Format_Name: Microsoft Access
Format_Version_Number: 97
File_Decompression_Technique: WinZip
Transfer_Size: 556 KB
Digital_Transfer_Option:
Online_Option:
Computer_Contact_Information:
Network_Address:
Network_Resource_Name: <http://www.state.nj.us/dep/njgs/geodata/index.htm>
Digital_Transfer_Option:
Offline_Option:
Offline_Media: not applicable
Recording_Format: not applicable
Fees: none
Ordering_Instructions: none

Metadata_Reference_Information:
Metadata_Date: 20120127
Metadata_Contact:
Contact_Information:
Contact_Person_Primary:
Contact_Person: William Mennel
Contact_Organization: New Jersey Geological Survey
Contact_Address:
Address_Type: Mailing Address
Address: PO Box 427
City: Trenton
State_or_Province: New Jersey
Postal_Code: 08625
Contact_Voice_Telephone: (609) 984-6587
Contact_Facsimile_Telephone: (609) 633-1004
Contact_Electronic_Mail_Address: Bill.Mennel@dep.nj.gov
Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
Metadata_Standard_Version: FGDC-STD-001-1998
Metadata_Access_Constraints: none
Metadata_Security_Information:
Metadata_Security_Classification: Unclassified

Generated by mp version 2.9.6 on Mon Jan 30 14:49:16 2012