Governor Chris Christie • Lt.Governor Kim Guadagno
NJ Home | Services A to Z | Departments/Agencies | FAQs  
rp main  |   dep home
NJDEP-Bureau of X-Ray Compliance

Dental Cone Beam Computed Tomography (CBCT)
Information

Notices pertaining to the new CBCT alternate QA Program can be found below.

  • Letter to facilities regarding Quality Assurance for CBCT units (PDF)
  • Letter to Physicist's regarding Quality Assurance for CBCT units (PDF)

In response to the alternative quality assurance (QA) program proposed by the New Jersey Dental Association and approved by the Commission on Radiation Protection (Commission), each manufacturer has identified the pages and test procedures within its user manuals that correspond to the required quality control tests contained in Table 3A of alternate quality assurance program. The Bureau will continue to review manufacturer submittals and post them to the website after it confirms that the manufacturers meet the requirements of the alternate QA program.

Listed below are the specific CBCT manufacturers’ approved alternative quality control test procedures and standards:

Alternate QA tables for Carestream units

  • Table 3A (Models 9500, CS9300, CS9300 Select, CS9000 3D, CS8100 3D) (PDF)
  • Table 6 (Models 9500, CS9300, CS9300 Select, CS9000 3D, CS8100 3D) (PDF

Alternate QA tables for Gendex units

  • Table 3A (Model GXCB-500) (PDF)
  • Table 3A (Model GXCB-500HD) (PDF)
  • Table 3A (Model GXDP-700 Palodex Group) (PDF)
  • Table 6 (Model GXCB-500) (PDF)
  • Table 6 (Model GXCB-500HD) (PDF)
  • Table 6 (Model GXDP-700 Palodex Group) (PDF)

Alternate QA tables for Imaging Sciences International units

  • Table 3A (Model I-Cat 17 19) (PDF)
  • Table 3A (Model I-Cat Classic) (PDF)
  • Table 3A (Model I-Cat FLX) (PDF)
  • Table 3A (Model I-Cat Precise) (PDF)
  • Table 6 (Model I-Cat 17 19) (PDF)
  • Table 6 (Model I-Cat Classic) (PDF)
  • Table 6 (Model I-Cat FLX) (PDF)
  • Table 6 (Model I-Cat Precise) (PDF)

Alternate QA tables for Instrumentarium units

  • Table 3A (Model OP 300 Palodex Group) (PDF)
  • Table 3A (Model OP Maxio 300 Palodex Group) (PDF)
  • Table 6 (Model OP 300 Palodex Group) (PDF)
  • Table 6 (Model OP Maxio 300 Palodex Group) (PDF)

Alternate QA tables for J. Morita units

  • Table 3A (Veraviewepocs) (PDF)
  • Table 6 (veraviewepocs) (PDF)

Alternate QA tables for Owandy units

  • Table 3A (Model I-Max Touch 3D) (PDF)
  • Table 6 (Model I-Max Touch 3D) (PDF)

Alternate QA tables for Planmeca units

  • Table 3A (Model ProMax 3D Max, 3D, 3Ds and 3D (Mid)) (PDF)
  • Table 6 (Model ProMax 3D Max, 3D, 3Ds and 3D (Mid)) (PDF)

Alternate QA tables for Rayscan units

  • Table 3A (Model Alpha System) (PDF)
  • Table 6 (Model Alpha System) (PDF)

Alternate QA tables for Sirona units

  • Table 3A (Model Galileos) (PDF)
  • Table 3A (Model Orthophos XG 3D/Cephalometric) (PDF)
  • Table 6 (Model Galileos) (PDF)
  • Table 6 (Model Orthophos XG 3D/Cephalometric) (PDF)

Alternate QA tables for Sordex units

  • Table 3A (Model Scanora 3D (Palodex Group)) (PDF)
  • Table 3A (Model Scanora 3Dx (Palodex Group)) (PDF)
  • Table 6 (Model Scanora 3D (Palodex Group)) (PDF)
  • Table 6 (Model Scanora 3Dx (Palodex Group)) (PDF)

Alternate QA tables for VaTech units

  • Table 3A (Model PAX i3D, i3D Green and i3D Smart) (PDF)
  • Table 6 (Model PAX i3D, i3D Green and i3D Smart) (PDF)

Alternate QA tables for Villa Radiology Systems units

  • Table 3A (Model Rotograph EVO 3D) (PDF)
  • Table 6 (Model Rotograph EVO 3D) (PDF)

Alternate QA tables for Xoran units

  • Table 3A (Model Mini Cat) (PDF)
  • Table 6 (Model Mini Cat) (PDF)

Department: NJDEP Home | About DEP | Index by Topic | Programs/Units | DEP Online
StatewideNJ Home | Services A to Z | Departments/Agencies | FAQs

Copyright © State of New Jersey, 1996-2016

This document was last modified on October 17, 2017->-