NEW JERSEY
AIR NATIONAL GUARD
FEDERAL TECHNICIAN VACANCY ANNOUNCEMENT
08-136
Previously Advertised as Vacancy Announcement# 08-022
OPENING DATE CLOSING DATE
25 April 2008 27 May 2008
THIS ANNOUNCEMENT MUST BE
POSTED ON UNIT BULLETIN BOARDS UNTIL THE DAY FOLLOWING THE CLOSING DATE.
|
Application must be
forwarded to: |
POSITION
TITLE,LOCATION,PDCN,GRADE & |
|
HQ New Jersey National
Guard |
|
|
Human Resource Office |
Sheet Metal Mechanic
(Acft) |
|
|
177th FW, |
|
|
80114000, WG-3806-10 |
|
(609) 562-0872 DSN 944-0872 |
$25.99 PH |
AREA OF CONSIDERATION:
AREA I - All Excepted Technicians of the 177th
Fighter Wing (FW)
AREA II - All Excepted Technicians of the New
AREA III - All personnel eligible for membership in
the NJANG
If a
If the individual selected is currently on a
title 10 tour no action can be taken until he/she is released from tour.
APPOINTMENT STATUS: ( X ) EXCEPTED
( ) COMPETITIVE
(
) OFFICER ( ) WARRANT OFFICER ( X ) ENLISTED
MINIMUM
RANK: SrA/E-4 MAXIMUM
RANK: SSgt/E-5
MILITARY POSITION: 177th Fighter Wing
NATIONAL GUARD MEMBERSHIP STATUS: Employment in this position requires
concurrent military assignment to a compatible military position in the New
Jersey National Guard in one of the following military specialty codes:
LEVEL OF CLEARANCE/INVESTIGATION: Critical/sensitive
SELECTIVE PLACEMENT FACTORS: Acceptance of
this position requires a minimum ASVAB Score of 47 in the Mechanical area. ASVAB
scores will not be required to apply for the position, however applicants must
obtain required ASVAB scores prior to acceptance of the position. The applicant must verify their scores with
their Military Personnel Flight/Military Personnel Office.
PRE-PLACEMENT PHYSICAL REQUIREMENTS: Requires a physical profile of: 3 3 3 1 3 2
METHOD OF SELECTION: NJDMAVA TPR 335.A Merit Placement Plan, and
the negotiated agreement.
SELECTING OFFICIAL: MSgt Michael D. Carr, Sheet
Metal Supervisor
EVALUATION METHODS: Applications will be
reviewed to determine basic eligibility.
Applicants must meet the basic qualifications for the position,
including any selective placement factors, in order to be considered basically
qualified. Selection for this position
will be made without consideration of race, religion, sex, marital status,
national origin, age, lawful political or other affiliation, membership or non
membership in an employee organization, physical handicap which does not
prevent normal performance of duties, or other non-merit factor. Complete and accurate information must be
provided on your resume or application.
Attach additional sheets if necessary.
Acceptance of this position
requires participation in the direct deposit/electronic funds transfer program.
THIS POSITION IS AUTHORIZED
BY TITLE 32 USC, SECTION 709. POSITION HAS DIFFERENT
NEW JERSEY AIR NATIONAL GUARD
FEDERAL TECHNICIAN VACANCY ANNOUNCEMENT 08-136
APPLICATION PROCEDURES:
1. Applicants
may choose to apply by one of the following methods:
a. A resume;
b. OF 612 “Optional Application for Federal
Employment”, which can be found on the NJ HRO WEB Page
(www.state.nj.us/military/hro)
or from the HRO.
2. All government employees must provide a copy
of their last SF 50.
3. Insure information related
to the specific job you are applying for is accurate, complete and describes
job-related qualifications, rather than your entire work history over a period
of years. Please include all related
military experience, i.e., AFSC, MOS, etc. and explain your duties and
responsibilities. HAVING THE AFSC/MOS
DOES NOT IN ITSELF QUALIFY YOU FOR THIS POSITION.
4. To be
considered for this position, you must meet and answer the requirements for
"Specialized Experience", to include KNOWLEDGE, SKILLS and ABILITIES,
or you will be found NOT QUALIFIED!
5. Government postage paid envelopes, interoffice
mail or government facsimile machines may not be used to submit
applications for employment. E-mail
applications will not be accepted.
6. Applications must be received
by close of business on the closing date.
MAJOR JOB DUTIES (a copy of the complete position
description is available in the Human Resource Office):
Independently inspects aircraft and determines the
nature and extent of repairs to be made, using applicable technical orders as
guidelines. Repairs cracks in aircraft
skin. Troubleshoots aircraft structural
repair situations in such areas as fuselage, tails, wings, cowlings, and
stabilizers. Aligns balances component
structures and airframe using precision measuring instruments and levels. Inspects damage or deterioration and
determines repair or replacement of plastic, fiberglass, composites, bonded
structures, and bonded honeycomb assemblies using powered and nonpowered tools and equipment. Manufactures and ensures that metal tubing,
conduits and cables are fabricated and tested in accordance with drawings and
specifications. Performs fabrication of
local manufactured items requited for aircraft and equipment. Sets up and operates power shears, brakes,
rolls, dimpling machines, drill presses, saws, portable powered tools,
equipment, including use of other tools of the trade. Prepares and designs layout, dies, jigs, and
templates necessary to carry out fabrication repair or modification of
aircraft, engine, AGE, and other equipment.
Identifies metal corrosion. Removes corrosion by mechanical and chemical
procedures to include use of portable powered (electric and pneumatic) sanders,
buffers, brushes, bead blasters, vacuum cleaners, scrapers, grinders, acids,
caustics, solvents, alcohols and other agents used in corrosion control
processes. Applies
protective coatings, markings, and decals after proper removal of corrosion and
treatment of metals. Identifies,
blends, stores, controls, and disposes of hazardous materials such as acids,
caustics, alcohols, solvents, cleaners, primers and surface coatings used for
corrosion removal, treatment and protection in accordance with applicable
directives. May
operate the wash rack. May assist in training of drill status guard members and in
maintenance of publication files of applicable technical orders, regulations,
manuals and local directives.
Prepares for and participates in various types of readiness evaluations
such as MEI, ORI, IG, and UE inspections mobility ad command support
exercises. Performs
other duties as assigned.
QUALIFICATIONS: Candidates must have a valid state driver’s
license for the state in which they live or are principally employed.
GENERAL EXPERIENCE: Experience, education, or training that has provided
the candidate with the ability to plan, manufacture, and install cylindrical,
square, or rectangular-shaped objects that have easily constructed fastenings
such as single and double-hem edges and single, double or grooved seams.
SPECIALIZED EXPERIENCE:. Must have 18 months experience in planning, layout, and construction skills to manufacture items and systems with dovetailed seams, set-in-seams, burred-bottom seams, or wired or lock seams.
ABILITY to plan, construct, assemble, disassemble, repair, fabricate, and install irregular items and systems having combined shapes to exacting tolerances using the least number of seams and amount of metal.
ABILITY to work independently from written or oral instructions, blueprints, sketches, or personnel inspection of items or systems to be manufactured or repaired.
ABILITY to independently develop plans and make decisions.
SKILL in making layouts, patterns and templates using recognized trade methods and practices.
KNOWLEDGE of and SKILL in the selection and use of special sheet metal tools and equipment
without instructions, and to develop modifications to prototype or test
equipment.
SUBSTITUTION FOR SPECIALIZED
EXPERIENCE: Appropriate credit may be given to applicants who have successfully
completed an approved
apprenticeship course(as evidence by appropriate certificate of
completion/diploma), in the sheet metal mechanic occupation. Care should be taken however, that credit is
based on the quality of the course content, the formal classroom and actual
shop work combination and length of course.
MUST SUBMIT CERTIFIED COLLEGE TRANSCRIPTS
FOR CREDIT TOWARDS EDUCATION. PLEASE
REFERENCE THE VACANCY
ANNOUNCEMENT NUMBER ON TRANSCRIPTS.
distribution: B,C,S HRO (3) DAG (1) DOIM (1) ESSO (4) USPFO (4) AASF #1 (2) AASF #2 (2) SAO (1) IG (1) CAO (1) DPCS-RR (1) POTO (2) UTES (5) CSMS-A (3) CSMS-B (3) ID (1) DOL (1) SRAA (1) DPCS (1) SMO (1) CFMO (1) 108ARW (25) 177FW (25) AFGE (1) ACT (1)