|
BOARD OF EXAMINERS OF ELECTRICAL CONTRACTORS
FIRE ALARM, BURGLAR ALARM AND LOCKSMITH
ADVISORY COMMITTEE
BUSINESS MEETING
JULY 15, 2008
PUBLIC SESSION AGENDA
1. Call To Order
- Open Public Meetings Act, Pledge Of Allegiance, Roll Call Of Members
2. Announcements
3. Approval Of Minutes Of May 20, 2008
4. Chairman’s Report
5. Executive Director’s Report
6. Report From The Rules Subcommittee, Meeting Held June 17, 2008
- Sunset of N.J.A.C. 13:31A (Draft Rules For Review, Meeting Notes)
- Open Items And Proposed Changes For Discussion By The Advisory Committee
- Self Installed Alarm Systems
- Continuing Education Requirements For Supervising (Unsupervised) Employees
7. Report From The Continuing Education Subcommittee
Sponsor: Educational Services
Title
- Alarm Systems Introduction - One Day (8 hours)
- ASSA Abloy Cylinder Service (8 hours)
- Basics Of Alarms And Card Access (8 hours)
- Bilock Cylinder Service (8 hours)
- Building, Fire, Life Safety And Accessability (8 hours)
- Corbin-Russell Cylinder And Core Servicing (8 hours)
- Desk And Utility Lock Installation And Servicing (8 hours)
- Ethics For Locksmiths (8 hours)
- Exit Device Installation And Servicing (8 hours)
- Hardware Specification (8 hours)
- Impressioning And Wafer (Disk) Reading (8 hours)
- In House Investigator Training (8 hours)
- Interchangeable Core Servicing (16 hours)
- Investigative Locksmithing 1 (8 hours)
- Investigative Locksmithing 2 (8 hours)
- Investigative Locksmithing 3 (8 hours)
- KABA-ILCO Simplex Service (8 hours)
- KABA Peaks Cylinder Servicing (8 hours)
7. Report From The Continuing Education Subcommittee (Continued)
Sponsor: Educational Services
- Key Control Procedures (8 hours)
- Keying System Forensics (8 hours)
- Large Format Interchangeable Cores (8 hours)
- Lock Bypass Techniques (8 hours)
- Lock Picking (8 hours)
- Lock Reading - Half Day (4 hours)
- Lock Shop Management (8 hours)
- Locksmithing 101 (8 hours)
- Locksmithing 101 - Two Day (8 hours)
- Master Key Application (8 hours)
- Master Keying Two Day Course (16 hours)
- Master Keying Advanced (8 hours)
- Master Keying Basic (8 hours)
- Master Keying Comprehensive - Four Day (32 hours)
- Master Keying Comprehensive - Three Day (24 hours)
- Master Keying-Rotating Constant - Two Day (16 hours)
- Master Key Specification (8 hours)
- Master Ring Cylinder Servicing (8 hours)
- Medeco Cylinder Service And Master Keying (8 hours)
- New Jersey Barrier Free Subcode (8 hours)
- Pyramid Cylinder Service (8 hours)
- Preassembled Lockset Service And Repair (8 hours)
- Scorpion Cylinder Service (8 hours)
- Schlage Everest Cylinder Servicing (8 hours)
- Schlage Primus Cylinder Servicing (8 hours)
- Small Format Interchangeable Core - One Day (8 hours)
- Yale Cylinder Servicing (8 hours)
8. Correspondence
- Mercer County Division of Central Services
- Whether A Locksmith License Is Required To Perform Maintenance Of Specialized
Locking Devices At The Mercer County Correction Center
9. Public Comments
10. Review Of Applications For Alarm And Locksmith Licenses
Review Of Applications For Alarm And Locksmith Business Licenses
11. Adjournment
Enclosures
- Public Session Minutes Of May 20, 2008
- N.J.A.C. 13:31A, F, B & L Draft Rules And Notes
- Information For Continuing Education Subcommittee Report
- Correspondence
Page last modified:
|