I. Description of Data to be Provided. The Data provided herein are distributed subject to the following conditions and restrictions.
SUBJECT DATA LAYERS
For all data contained herein, NJDEP makes no representations of any kind, including, but not limited to, the warranties of merchantability or fitness for a particular use, nor are any such warranties to be implied with respect to the digital data layers furnished hereunder. NJDEP assumes no responsibility to maintain them in any manner or form.
II. Terms of Agreement 1. Digital data received from the NJDEP are to be used solely for internal purposes in the conduct of daily affairs.
2. The data are provided, as is, without warranty of any kind and the user is responsible for understanding the accuracy limitations of all digital data layers provided herein, as documented in the accompanying cross-reference files (see Section 1.14 CROSS_REFERENCE). Any reproduction or manipulation of the above data must ensure that the coordinate reference system remains intact.
3. Digital data received from the NJDEP may not be reproduced or redistributed for use by anyone without first obtaining written permission from the NJDEP. This clause is not intended to restrict distribution of printed mapped information produced from the digital data.
4. Any maps, publications, reports, or other documents produced as a result of this project that utilize NJDEP digital data will credit the NJDEP's Geographic Information System (GIS) as the source of the data with the following credit/disclaimer:
"This (map/publication/report) was developed using New Jersey Department of Environmental Protection Geographic Information System digital data, but this secondary product has not been verified by NJDEP and is not state-authorized."
5. Users shall require any independent contractor, hired to undertake work that will utilize digital data obtained from the NJDEP, to agree not to use, reproduce, or redistribute NJDEP GIS data. Data utilized by an independent contractor will be required to be returned to the original user at the close of such contractual work. Users hereby agree to abide by the use and reproduction conditions specified above and agree to hold any independent contractor to the same terms. By using data provided herein, the user acknowledges that terms and conditions have been read and that the user is bound by these criteria.
DATA AUTOMATION AND ACCURACY The maps were scanned using a CalComp ScanPlus II roll-feed, E-format, two-camera scanner at 400 dots per inch. The scanned image accuracy is reported at +-.25 percent. A CalComp 9500 digitizer with an accuracy of +- 0.005 in. (+-0.127 mm) was used for editing the data and inputting the dikes data. All features were vectorized or digitized as board-inches. Proof-plots were generated and overlaid onto the original Miscellaneous Investigations and Open-File maps. Tics were digitized into the coverages using the 7.5 mjnute graticule on the base map. The coverages were then transformed into NAD83 state plane coordinates utilizing the New Jersey Department of Environmental Protection STATCO coverage. Four tics on each mylar were utilized to register the data for digitizing (editing). A root-mean-square (RMS) error of 0.005 was required (approximately 41.67 feet at 1:100,000 scale). Proof plots were made for each data set on mylar and compared to the original data. Linework that deviated from the original position by more than 0.02 inch were re-digitized, re-plotted, and corrected until acceptable results were obtained.
AUTHORS NOTES: Enlargement of the data to more detailed scales than specified could result in registration errors. If information is needed at more detailed scales, please contact the New Jersey Geological Survey to determine the status of detailed mapping.
Geologic contacts, folds, dikes, and faults were scanned and digitized from United States Geological Survey Miscellaneous Investigations Series Map I-2540-A (Bedrock Geologic Map of Northern New Jersey), Open-File Series Map 95-253 (Bedrock Geologic Map of Central New Jersey), and Open- File Series Map 95-254 (Bedrock Geologic Map of Southern New Jersey). The files were geo-registered to United States Geological Survey 30x60 minute, 1:100,000 scale topographic maps. The state boundary is taken from the STATE reference coverage available from the New Jersey Department of Environmental Protection, Office of Information Resources Management, 401 E. State St., Trenton, NJ 08625. The data meets the national map accuracy standards for the 1:100,000 scale. Please refer to metadata files for STATCO for more information on data origin, quality, and limitations.
LINKIND:
0 - normal
KIND:
us - normal
GEONUM: GEOABB: GEONAME: SYMBOL:
3800 Jd Jurassic Diabase 1
8150 SObl Lamprophyre tinguaite phonlite bostonite and malignite, undifferentiated 3
9280 Zd Late Proterozoic Diabase 2