Congressional District Boundaries for the State of New Jersey, 2012 - 2022; NJOGIS municipal boundaries - based
Metadata also available as
Metadata:
- Identification_Information:
-
- Citation:
-
- Citation_Information:
-
- Originator: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Publication_Date: 20201105
- Title:
-
Congressional District Boundaries for the State of New Jersey, 2012 - 2022; NJOGIS municipal boundaries - based
- Edition:
-
2020-11-05 Spatial data were revised to reflect improvements in NJ framework data
- Geospatial_Data_Presentation_Form: vector digital data
- Publication_Information:
-
- Publication_Place: PO Box 212, Trenton, NJ, 08625-0212, US
- Publisher: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Online_Linkage:
-
https://njogis-newjersey.opendata.arcgis.com/datasets/congressional-districts-of-nj-hosted-3424
- Online_Linkage: https://njogis-newjersey.opendata.arcgis.com/
- Description:
-
- Abstract:
-
This polygon layer delineates the US Congressional District boundaries in New Jersey, 2012 - 2022. This version of the layer uses high-quality base map spatial data published by the State of New Jersey, instead of Census Bureau geographic data (TIGER.) Where no higher-quality data were available, the TIGER lines were used. This layer, which overlays correctly the highest quality municipal boundary data for New Jersey is an UNofficial version; by law, the official version is based on US Census data (geographic and demographic.) Roster information is included for the current Congress as of edition date. Officeholder contact information is updated infrequently in this data set and should be checked from an independent source before use.
- Purpose:
-
The data were created to map re-apportioned representation of the citizens of New Jersey in the United States House of Representatives, following the 2010 decennial census. These districts apply to the election of U.S. Representatives from New Jersey beginning in 2012 with the election of the 113th Congress. This revised version of the data was created in order to overlay properly with high-quality vector framework GIS data published by the State of New Jersey.
- Supplemental_Information:
-
Districts established by the Redistricting Commission were re-created using Municipal Boundaries (Govt_admin_municipal_bnd); roads (Tran_road); hydrography (streams, NHDStreams_2002); 2015 statewide orthoimagery. Where no higher-quality data were available, the TIGER lines were used, or adjusted to other block boundary visible physical features.
Substantial portions of the original metadata were written by Yelena Pikovskaya.
- Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 20201105
- Currentness_Reference: publication date
- Status:
-
- Progress: Complete
- Maintenance_and_Update_Frequency: Irregular
- Spatial_Domain:
-
- Bounding_Coordinates:
-
- West_Bounding_Coordinate: -75.587089
- East_Bounding_Coordinate: -73.899178
- North_Bounding_Coordinate: 41.357794
- South_Bounding_Coordinate: 38.924577
- Keywords:
-
- Theme:
-
- Theme_Keyword_Thesaurus: None
- Theme_Keyword: districts
- Theme_Keyword: boundary
- Theme_Keyword: condis
- Theme_Keyword: congress
- Theme_Keyword: Govt_admin_condis
- Theme_Keyword: boundaries
- Theme_Keyword: politics
- Theme_Keyword: Congressional Districts
- Theme_Keyword: public
- Theme:
-
- Theme_Keyword_Thesaurus: ISO 19115 Topic Categories
- Theme_Keyword: boundaries
- Place:
-
- Place_Keyword_Thesaurus: None
- Place_Keyword: New Jersey
- Place_Keyword: NJ
- Access_Constraints: None
- Use_Constraints:
-
This data set is not survey data and must not be used as survey data. The polygons delineated in this data set do not represent legal boundaries. See the balance of this metadata record for conditions that limit appropriate uses. Acknowledgement of the data set provider, the New Jersey Office of Information Technology, Office of GIS (NJOGIS), would be appreciated for maps, data or other products derived from this data set. The State of New Jersey makes great effort to provide secure, accurate, and complete data and metadata. However, portions of the data and metadata may be incorrect or not current. Any errors or omissions should be reported for investigation. The State of New Jersey, its officers, employees or agents shall not be liable for damages or losses of any kind arising out of or in connection with the use or performance of data and metadata, including but not limited to, damages or losses caused by reliance upon the accuracy or timeliness of any such data and metadata, or damages incurred from the viewing, distributing, or copying of those materials. The data and metadata are provided "as is." No warranty of any kind, implied, expressed, or statutory, including but not limited to the warranties of non-infringement of third party rights, title, merchantability, fitness for a particular purpose, and freedom from computer virus, is given with respect to the data and metadata, or its hyperlinks to other Internet resources. The State disclaims any duty or obligation either to maintain availability of or to update the data and metadata.
- Data_Set_Credit:
-
-NJ Redistricting Commission
-U.S. Library of Congress
-NJ Office of Information Technology, Office of GIS (NJOGIS)
- Native_Data_Set_Environment: Version 6.2 (Build 9200) ; Esri ArcGIS 10.5.1.7333
- Cross_Reference:
-
- Citation_Information:
-
- Originator: NJ Redistricting Commission, 2011 Congressional Commission
- Publication_Date: 20111223
- Title: NJ Congressional Redistricting 2011, supporting data
- Geospatial_Data_Presentation_Form:
-
U.S. Census Bureau's Master Address File / Topologically Integrated Geographic Encoding and Referencing (MAF/TIGER) Database (MTDB).
- Publication_Information:
-
- Publication_Place: Trenton, NJ
- Publisher: NJ Redistricting Commission
- Online_Linkage: <http://njredistrictingcommission.org/adoption.asp>
- Data_Quality_Information:
-
- Attribute_Accuracy:
-
- Attribute_Accuracy_Report:
-
A few attributes were copied from the congressional district shapefile released by the NJ Redistricting Commission. Other attributes were derived from the US Congress website maintained by the Library of Congress. Attribute material was checked by inspection. Officeholder contact information is updated infrequently in this data set and should be checked from an independent source before use.
- Logical_Consistency_Report:
-
These boundary polygons were created using the US Census Bureau file geodatabase polygon feature class as a reference. The most updated NJ municipality layer was used as the base data for the October 2020 update. Municipalities were split using the visible and nonvisible lines created or maintained as reference data at NJOGIS (roads, streams, railoads) and orthophotography physical boundaries. Only boundaries co-incident with municipal boundaries were topologically validated.
- Completeness_Report:
-
In this redistricting, New Jersey lost one district due to slower population growth in New Jersey than in some other states. For the 112th Congress, New Jersey had 13 districts; beginning with the 2012 elections, New Jersey has 12 districts, all of which are shown in this data set.
- Positional_Accuracy:
-
- Horizontal_Positional_Accuracy:
-
- Horizontal_Positional_Accuracy_Report:
-
Positional accuracy is based on the NJOGIS data for municipal and county boundaries, road centerlines, streams, and other visible features. Most of these were created at a nominal scale of 1:2400 or better.
- Lineage:
-
- Source_Information:
-
- Source_Citation:
-
- Citation_Information:
-
- Originator: NJ Redistricting Commission
- Publication_Date: 20111223
- Title:
-
Congressional Districts 2012 reported by NJ Redistricting Commission
- Other_Citation_Details:
-
The following versions were used:
-Original shapefile delivered by the Redistricting Commission
-2020 partnership data release by U.S. Census Bureau, geography division
-Original pdf maps of split municipalities, delivered by the Redistricting Commission and published by the NJ Department of State, Divison of Elections
- Type_of_Source_Media: hardDisk
- Source_Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 20111223
- Source_Currentness_Reference: publication date
- Source_Citation_Abbreviation:
-
Congressional Districts 2012 reported by NJ Redistricting Commission
- Source_Contribution:
-
Official (TIGER) US Congressional District Boundaries in New Jersey, 2012 - 2022. This shapefile was used as a reference source for the original split lines within municipalities.
- Source_Information:
-
- Source_Citation:
-
- Citation_Information:
-
- Originator: United States Congress
- Publication_Date: 20200122
- Title: CONGRESS.GOV
- Publication_Information:
-
- Publication_Place: Washington, DC
- Publisher: Library of Congress
- Other_Citation_Details: Publication date represents approximate date of inspection.
- Online_Linkage: https://www.congress.gov/members
- Type_of_Source_Media: onLine
- Source_Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 20200122
- Source_Currentness_Reference: publication date (date referenced)
- Source_Citation_Abbreviation: CONGRESS.GOV
- Source_Contribution: Official Web site of the United States Congress
- Source_Information:
-
- Source_Citation:
-
- Citation_Information:
-
- Originator: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Publication_Date: 20200410
- Title: Municipal Boundaries of New Jersey
- Type_of_Source_Media: onLine
- Source_Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 20200410
- Source_Currentness_Reference: publication date
- Source_Citation_Abbreviation: Govt_admin_municipal_bnd
- Source_Contribution:
-
A spatial representation of municipalities in New Jersey developed by the NJ Office of Information Technology, Office of GIS (NJOGIS) in NJ State Plane Coordinate System (NAD83).
- Process_Step:
-
- Process_Description:
-
The municipal boundary layer published by NJOGIS in April 2020 was used as the main source layer. TIGER feature class of congressional district boundaries, downloaded in
August 2020 from the U.S. Census Bureau website, was used as a reference. The municipal boundary layer was re-attributed to include a congressional district field and overlain on the TIGER congressional districts. All the municipalities within a congressional district were selected manually and the congressional district field filled by calculation. Municipalities that included more than one congressional district were assigned only to one. The polygons were then merged on congressional district attribute during an edit session.
After the merge, the additional boundary lines were created to split the congressional district polygons for municipalities covered by more than one Congressional District. Split lines were snapped to streets, roads, streams, railroad ROW centerlines, or drawn over physical features visible on the orthophotography corresponding to census block boundaries. In some cases the split line originally created by NJOGIS in 2012 was re-used; these existing split lines were based on physical features and on the Congressional District shapefile orginally released by the Redistricting Commission. The additional polygon created by each split was then merged with the appropriate congressional district polygon.
During spatial editing, both topology and ordinary editing tools were used.
- Source_Used_Citation_Abbreviation: Govt_admin_municipal_bnd
- Source_Used_Citation_Abbreviation: PVS_20_v1_cd_34.shp
- Process_Date: 20201020
- Process_Time: 080000
- Process_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Contact_Person: Edith Konopka, Ph.D., GISP
- Contact_Position: Spatial Database Manager
- Contact_Address:
-
- Address_Type: mailing
- Address: PO Box 212
- City: Trenton
- State_or_Province: NJ
- Postal_Code: 08625-0212
- Country: US
- Contact_Voice_Telephone: 609-376-7530
- Contact_Electronic_Mail_Address: edith.konopka@tech.nj.gov
- Hours_of_Service: 9-4
- Contact_Instructions: Email is preferred.
- Process_Step:
-
- Process_Description:
-
Congressional District feature class Govt_admin_condis was created with same schema as NJOGIS previous publication release. Spatial features and DISTRICT attribute were loaded from the edit data. Remaining attributes were calculated from join with previous release of the NJOGIS congressional district data. The additional attributes had been created as follows:
Officeholder information was extracted from the U.S. Congress website maintained by the Library of Congress, on November 1, 2019, and updated in early 2020. CENSUS_AREA in square miles was calculated using Python 9.3 expression, from U.S. Census Bureau TIGER Congressional District data release of 2019, as follows:
round((!Govt_TIGER2019_condis116.ALAND! + !Govt_TIGER2019_condis116.AWATER!)*(3.8610216*10**-7), 2).
- Process_Date: 20201026
- Process_Time: 090000
- Process_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Contact_Person: Edith Konopka, Ph.D., GISP
- Contact_Position: Spatial Database Manager
- Contact_Address:
-
- Address_Type: mailing
- Address: PO Box 212
- City: Trenton
- State_or_Province: NJ
- Postal_Code: 08625-0212
- Country: US
- Contact_Voice_Telephone: 609-376-7530
- Contact_Facsimile_Telephone: 609-633-0400
- Contact_Electronic_Mail_Address: edith.konopka@tech.nj.gov
- Hours_of_Service: 9-4
- Contact_Instructions: Email is preferred.
- Process_Step:
-
- Process_Description:
-
The new NJOGIS congressional district feature class was included in a feature dataset with a copy of the municipal boundary feature class. Topology rules disallowed overlaps and gaps between the districts, and required that their boundaries be covered by municipal boundaries. Municipal boundaries were set at rank 1 and Congressional Districts at rank 5 to force the latter to conform to the former as applicable. The topology was validated with a 0.01 ft cluster tolerance, and all errors were reviewed to make sure that they were legitimate exceptions (split municipalities and outside state boundaries.) After QA checks, three minor boundary Congressional District boundary errors were corrected in Point Pleasant
- Process_Date: 20201104
- Process_Time: 133000
- Process_Step:
-
- Process_Description:
-
An additional feature class was created by reprojecting the NAD83 NJ State Plane feet layer to Web Mercator, for use in maps with other Web Mercator data from ArcGIS Online.
- Process_Date: 20201105
- Spatial_Data_Organization_Information:
-
- Direct_Spatial_Reference_Method: Vector
- Point_and_Vector_Object_Information:
-
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: GT-polygon composed of chains
- Point_and_Vector_Object_Count: 12
- Spatial_Reference_Information:
-
- Horizontal_Coordinate_System_Definition:
-
- Planar:
-
- Map_Projection:
-
- Map_Projection_Name: NAD 1983 StatePlane New Jersey FIPS 2900 Feet
- Transverse_Mercator:
-
- Scale_Factor_at_Central_Meridian: 0.9999
- Longitude_of_Central_Meridian: -74.5
- Latitude_of_Projection_Origin: 38.83333333333334
- False_Easting: 492125.0
- False_Northing: 0.0
- Planar_Coordinate_Information:
-
- Planar_Coordinate_Encoding_Method: coordinate pair
- Coordinate_Representation:
-
- Abscissa_Resolution: 0.0003280833333333335
- Ordinate_Resolution: 0.0003280833333333335
- Planar_Distance_Units: foot_us
- Geodetic_Model:
-
- Horizontal_Datum_Name: D North American 1983
- Ellipsoid_Name: GRS 1980
- Semi-major_Axis: 6378137.0
- Denominator_of_Flattening_Ratio: 298.257222101
- Entity_and_Attribute_Information:
-
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: Govt_admin_condis
- Entity_Type_Definition:
-
Congressional District Boundary polygon based on NJ state framework data
- Entity_Type_Definition_Source: NJ Office of Infomation Technology, Office of GIS (NJOGIS)
- Attribute:
-
- Attribute_Label: OBJECTID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: CENSUS_AREA
- Attribute_Definition:
-
Area of the district in square miles as calculated from the original TIGER data
- Attribute_Definition_Source: NJOGIS
- Attribute_Domain_Values:
-
- Range_Domain:
-
- Range_Domain_Minimum: 68.97
- Range_Domain_Maximum: 2874.3
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: DISTRICT
- Attribute_Definition:
-
Numeric indicator code (here in text format) for the Congressional District
- Attribute_Definition_Source: US Census Bureau
- Attribute_Domain_Values:
-
- Codeset_Domain:
-
- Codeset_Name: Congressional Districts (post - 2010 census)
- Codeset_Source: US Census Bureau
- Attribute:
-
- Attribute_Label: DIST_LABEL
- Attribute_Definition:
-
A text description and identifier for the Congressional District
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Text string of "District" and identifier
- Attribute:
-
- Attribute_Label: US_REP
- Attribute_Definition:
-
The name of the US Representative for the congressional district, and party
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Name and party affiliation from online US Congress roster
- Attribute:
-
- Attribute_Label: PARTY
- Attribute_Definition: Party affiliation of Representative, abbreviated.
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: D
- Enumerated_Domain_Value_Definition: Democratic Party
- Enumerated_Domain_Value_Definition_Source: NJOGIS
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: R
- Enumerated_Domain_Value_Definition: Republican Party
- Enumerated_Domain_Value_Definition_Source: NJOGIS
- Attribute:
-
- Attribute_Label: CONTACT
- Attribute_Definition:
-
Office locations and contact information for the US Representative
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Text descriptions from online roster
- Attribute:
-
- Attribute_Label: SENATOR1
- Attribute_Definition: The name of a US Senator for New Jersey, and party
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Name and party affiliation from online US Senate roster
- Attribute:
-
- Attribute_Label: S1_PARTY
- Attribute_Definition: Party affiliation of Senator1, abbreviated.
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: D
- Enumerated_Domain_Value_Definition: Demoncratic Party
- Enumerated_Domain_Value_Definition_Source: NJOGIS
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: R
- Enumerated_Domain_Value_Definition: Republican Party
- Enumerated_Domain_Value_Definition_Source: NJOGIS
- Attribute:
-
- Attribute_Label: S1_CONTACT
- Attribute_Definition: Office locations and contact information for Senator1
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Text descriptions from online roster
- Attribute:
-
- Attribute_Label: SENATOR2
- Attribute_Definition: The name of a US Senator for New Jersey, and party
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Name and party affiliation from online US Senate roster
- Attribute:
-
- Attribute_Label: S2_PARTY
- Attribute_Definition: Party affiliation of Senator2, abbreviated.
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: D
- Enumerated_Domain_Value_Definition: Democratic Party
- Enumerated_Domain_Value_Definition_Source: NJOGIS
- Attribute_Domain_Values:
-
- Enumerated_Domain:
-
- Enumerated_Domain_Value: R
- Enumerated_Domain_Value_Definition: Republican Party
- Enumerated_Domain_Value_Definition_Source: NJOGIS
- Attribute:
-
- Attribute_Label: S2_CONTACT
- Attribute_Definition: Office locations and contact information for Senator2
- Attribute_Definition_Source: NJDEP OIRM BGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Text descriptions from online roster
- Attribute:
-
- Attribute_Label: GLOBALID
- Attribute_Definition: Globally-unique identifier
- Attribute_Definition_Source: NJOGIS
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Generated by Esri software.
- Attribute:
-
- Attribute_Label: cdfp
- Attribute_Definition: District identifier from TIGER data.
- Attribute_Definition_Source: NJOGIS
- Attribute_Domain_Values:
-
- Codeset_Domain:
-
- Codeset_Name:
-
US Census Bureau TIGER congressional districts for 113th Congress
- Codeset_Source: US Census Bureau
- Attribute:
-
- Attribute_Label: SHAPE_Length
- Attribute_Definition: Length of feature in internal units.
- Attribute_Definition_Source: Esri
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Positive real numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: SHAPE_Area
- Attribute_Definition: Area of feature in internal units squared.
- Attribute_Definition_Source: Esri
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Positive real numbers that are automatically generated.
- Distribution_Information:
-
- Distributor:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Contact_Address:
-
- Address_Type: mailing
- Address: PO Box 212
- City: Trenton
- State_or_Province: NJ
- Postal_Code: 08625
- Country: US
- Contact_Voice_Telephone: use email
- Contact_Electronic_Mail_Address: njgin@oit.nj.gov
- Distribution_Liability: See General Constraints, Use Limitation (Use Constraints)
- Standard_Order_Process:
-
- Digital_Form:
-
- Digital_Transfer_Information:
-
- Format_Name: Esri map service - ArcREST
- Format_Version_Number: 10.x
- Format_Specification:
-
https://developers.arcgis.com/rest/services-reference/get-started-with-the-services-directory.htm
- Format_Information_Content: Streamed features - Hosted
- Digital_Transfer_Option:
-
- Online_Option:
-
- Computer_Contact_Information:
-
- Network_Address:
-
- Network_Resource_Name:
-
https://services2.arcgis.com/XVOqAjTOJ5P6ngMu/arcgis/rest/services
- Fees: 0.00
- Ordering_Instructions:
-
This layer is available as an ArcGIS Online hosted feature service, and as a map service hosted by NJOGIS and registered with ArcGIS Online. It also is available for download from NJGIN Open Data as a zipped shapefile.
Service users who would like to be notified of future layer definition changes or outages should email to njgin@oit.nj.gov, specifying which layer(s), name of the application and organization, and full contact information for application steward(s) including a group email if it exists.
- Metadata_Reference_Information:
-
- Metadata_Date: 20201109
- Metadata_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: NJ Office of Information Technology, Office of GIS (NJOGIS)
- Contact_Person: Edith Konopka
- Contact_Position: Spatial Database Manager
- Contact_Address:
-
- Address_Type: mailing
- Address: PO Box 212
- City: Trenton
- State_or_Province: NJ
- Postal_Code: 08625-0212
- Country: US
- Contact_Voice_Telephone: 609-376-7530
- Contact_Electronic_Mail_Address: edith.konopka@tech.nj.gov
- Hours_of_Service: 9-4
- Metadata_Standard_Name: FGDC Content Standard for Digital Geospatial Metadata
- Metadata_Standard_Version: FGDC-STD-001-1998
- Metadata_Time_Convention: local time
Generated by mp version 2.9.12 on Fri Dec 04 14:01:16 2020