Well Program Atlas Sheet Grid 2x2m (2 minute by 2 minute) for New Jersey, Edition 2004 (Grid_ATLAS_2MX2M)
Metadata also available as
Metadata:
- Identification_Information:
-
- Citation:
-
- Citation_Information:
-
- Originator:
-
New Jersey Department of Environmental Protection (NJDEP), Division of Information Technology (DOIT), Bureau of Geographic Information Systems (BGIS)
- Publication_Date: 1996
- Title:
-
Well Program Atlas Sheet Grid 2x2m (2 minute by 2 minute) for New Jersey, Edition 2004 (Grid_ATLAS_2MX2M)
- Edition:
- Geospatial_Data_Presentation_Form: vector digital data
- Publication_Information:
-
- Publication_Place: Trenton, NJ
- Publisher: NJ Department of Environmental Protection (NJDEP)
- Online_Linkage: https://www.nj.gov/dep/gis
- Online_Linkage: https://www.nj.gov/dep/gis/geowebsplash.htm
- Online_Linkage: https://gisdata-njdep.opendata.arcgis.com
- Description:
-
- Abstract:
-
The Atlas2x2m is a 2 minute by 2 minute grid dissolved from the Well Program Atlas Sheet Grid for New Jersey.
That grid was based on an old map series called the New Jersey Atlas Sheets and on a reference system based on them called the New Jersey Rectangular Coordinate System. The grid system developed as the ATLAS_GRID does not exist on the atlas sheets but is based on latitude and longitude grids included on the sheets. The original 17 map sheets (numbered from 21 through 37) were produced with grid lines shown every 2 minutes of latitude and every 2 minutes of longitude, producing a regular grid of RECTANGLES. This rectangular grid forms the basis of the reference system. For each sheet, groups of RECTANGLES are aggregated together to form BLOCKS . Each BLOCK in each sheet is given a number from 1 to 45. Within each BLOCK, each RECTANGLE is numbered from 1 to 9. RECTANGLES are further divided into 9 sections called UNITS (numbered 1 to 9) and each UNIT divided into 9 sections called PARTS (also numbered 1 to 9). Each of these smallest sub divisions can be identified by a unique 7 digit code composed of the ATLAS SHEET number, and the number of the BLOCK, RECTANGLE, UNIT and PART. This 7 digit identifier is part of the historical well database and is still used on new permits.
- Purpose:
-
This grid was developed to track the approximate locations of permitted wells throughout the state.
- Supplemental_Information:
-
The concept for this grid was developed in the late 1970's. The grid is based on an old set of topographic map sheets called the New Jersey Atlas Sheets. These were originally printed at a scale of 1 inch equals 1 mile (1:63360). The original sheets, of which there are 17, were engraved with lines of latitude and longitude every 2 minutes. These lines formed a regular grid on each sheet, and by dividing this grid into smaller and smaller sections in a regular pattern, small areas of the state approximately 3/16 x 1/4 mile in extent could be isolated and identified by a unique code. The code starts with the sheet number, followed by an identifier for each smaller subdivision. The final code is a unique 7 digit number.
The digital version of this grid, ATLAS_GRID, was not digitized from the original sheets but generated in ARC/INFO base on the coordinate extent of each original atlas sheet. Once a coverage was generated representing the boundary of each sheet it was subdivided into the appropriate sections described in the New Jersey Coordinate Reference System documents using the GENERATE command in ARC/INFO. The subdivisions were then coded as described in the documents. The original grids were generated in decimal degrees, and then projected to New Jersey State Plane Feet, NAD83. All individual projected atlas sheet digital grids were then joined together to create an aggregate grid. As a final step, the aggregated grid was clipped to the New Jersey State boundary, so that only grid cells covering New Jersey are included in the final digital coverage, ATLAS_GRID
While this grid is originally called the New Jersey Coordinate Reference System, it should be noted that the unique identifiers used to identify each cell within the grid are not to be confused with an X and Y coordinate reference value. They are not New Jersey State Plane Coordinate System values. While they can be used to locate a unique area of the state, the CELL codes do not represent any real coordinate values in and of themselves.
- Time_Period_of_Content:
-
- Currentness_Reference: Publication date
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 2004
- Status:
-
- Progress: Complete
- Maintenance_and_Update_Frequency: None Planned
- Spatial_Domain:
-
- Bounding_Coordinates:
-
- West_Bounding_Coordinate: -75.58914
- East_Bounding_Coordinate: -73.896008
- North_Bounding_Coordinate: 41.358935
- South_Bounding_Coordinate: 38.923452
- Keywords:
-
- Theme:
-
- Theme_Keyword_Thesaurus: None
- Theme_Keyword: Atlas sheet
- Theme_Keyword: grid
- Theme_Keyword: well permit
- Theme_Keyword: New Jersey Rectangular Coordinate System
- Theme_Keyword: 2 minute
- Theme:
-
- Theme_Keyword_Thesaurus: ISO 19115 Topic Keyword
- Theme_Keyword: imageryBaseMapsEarthCover
- Theme:
-
- Theme_Keyword_Thesaurus: User
- Theme_Keyword: Grid_ATLAS_2MX2M
- Theme_Keyword: atlas2x2m
- Place:
-
- Place_Keyword_Thesaurus: none
- Place_Keyword: New Jersey
- Access_Constraints:
-
In most cases, a downloadable shapefile (.zip) version of this layer is also available. Information to download the shapefile can be found in the Distribution Section of this metadata record. This data layer is shown in the NJDEP's NJ-GeoWeb mapping application accessible through the Online Linkage: https://www.nj.gov/dep/gis/geowebsplash.htm
- Use_Constraints:
-
New Jersey Department of Environmental Protection (NJDEP) Data Distribution Agreement.
The data provided herein are distributed subject to the following conditions and restrictions: NJDEP assumes no responsibility to maintain them in any manner or form and disclaims any duty or obligation to either maintain availability of or to update the data.
Terms of Agreement
1. All data is provided, as is, without any representation or warranty of any kind, implied, expressed or statutory including, but not limited to, the warranties of non-infringement of third party rights, title, merchantability or fitness for a particular use, freedom from computer virus nor are any such warranties to be implied with respect to the digital data layers furnished hereunder. User is responsible for understanding the accuracy limitations of all digital data layers provided herein, as documented in the accompanying cross-reference files (see SUPPLEMENTAL INFORMATION). Any reproduction or manipulation of the above data must ensure that the coordinate reference system remains intact.
2. Digital data received from the NJDEP may not be reproduced or redistributed without all the metadata provided.
3. Any maps, publications, reports, or other documents produced as a result of this project that utilize this digital data will credit the NJDEP's Geographic Information System (GIS) as the source of the data with the following credit/disclaimer: "This (map/publication/report) was developed using New Jersey Department of Environmental Protection Geographic Information System digital data, but this secondary product has not been verified by NJDEP and is not state-authorized or endorsed."
4. NJDEP makes no warranty that digital data are free of Copyright or Trademark claims or other restrictions or limitations on free use or display. Making a copy of this data may be subject to the copyright of trademark laws.
- Data_Set_Credit:
-
NJ Department of Environmental Protection (NJDEP), Division of Information Technology (DOIT), Bureau of Geographic Information Systems (BGIS)
- Native_Data_Set_Environment: Unix ArcInfo 7.2.1; ESRI shapefile; ArcView 3.2
- Cross_Reference:
-
- Citation_Information:
-
- Originator: New Jersey Geological Survey
- Publication_Date: 1974
- Title: Land Oriented Reference System, Bulletin 74
- Geospatial_Data_Presentation_Form: pdf
- Publication_Information:
-
- Publication_Place: Trenton, NJ
- Publisher: NJGF
- Online_Linkage: https://www.nj.gov/dep/njgs/enviroed/oldpubs/bulletin74.pdf
- Point_of_Contact:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: Bureau of Geographic Information Systems (BGIS)
- Contact_Person: Jacoby, Lou
- Contact_Position: Geographic Information Systems Specialist 1
- Contact_Address:
-
- Address_Type: mailing address
- Address: 401 East State Street
- City: Trenton
- State_or_Province: NJ
- Postal_Code: 08625
- Contact_Voice_Telephone: 609-633-1203
- Contact_Electronic_Mail_Address: Lou.Jacoby@dep.nj.gov
- Contact_Instructions: via email
- Data_Quality_Information:
-
- Attribute_Accuracy:
-
- Attribute_Accuracy_Report:
-
Attributes were coded mostly using ARC/INFO amls. Random checks were made on the original grids to confirm coding was according to the coding structure in the description. Coding was done automatically for each sheet and the first and last cells in each sheet were correct for all sheets. Internal sheets were not individually checked, but there is a high probability that they are correct since the first and last cells where checked.
- Logical_Consistency_Report:
-
Polygon topology exists. Data were reviewed for correct topological structure.
- Completeness_Report: Grid for the entire state has been generated and coded.
- Positional_Accuracy:
-
- Horizontal_Positional_Accuracy:
-
- Horizontal_Positional_Accuracy_Report: None
- Lineage:
-
- Process_Step:
-
- Process_Date: Unknown
- Process_Description:
-
The concept for this grid was developed in the late 1970's. The grid is based on an old set of topographic map sheets called the New Jersey Atlas Sheets. These were originally printed at a scale of 1 inch equals 1 mile (1:63360). The original sheets, of which there are 17, were engraved with lines of latitude and longitude every 2 minutes. These lines formed a regular grid on each sheet, and by dividing this grid into smaller and smaller sections in a regular pattern, small areas of the state approximately 3/16 x 1/4 mile in extent could be isolated and identified by a unique code. The code starts with the sheet number, followed by an identifier for each smaller subdivision. The final code is a unique 7 digit number.
The digital version of this grid, ATLAS_GRID, was not digitized from the original sheets, but generated in ARC/INFO base on the coordinate extent of each original atlas sheet. Once a coverage was generated representing the boundary of each sheet, it was subdivided into the appropriate sections described in the New Jersey Coordinate Reference System documents using the GENERATE command in ARC/INFO. The subdivisions were then coded as described in the documents. The original grids were generated in decimal degrees, and then projected to New Jersey State Plane Feet, NAD83. All individual projected atlas sheet digital grids were then joined together to create an aggregate grid. As a final step, the aggregated grid was clipped to the New Jersey State boundary, so that only grid cells covering New Jersey are included in the final digital coverage, ATLAS_GRID
While this grid is originally called the New Jersey Coordinate Reference System, it should be noted that the unique identifiers used to identify each cell within the grid are not to be confused with an X and Y coordinate reference value. They are not New Jersey State Plane Coordinate System values. While they can be used to locate a unique area of the state, the CELL codes do not represent any real coordinate values in and of themselves.
- Process_Step:
-
- Process_Date: 2004
- Process_Description:
-
Data was dissolved from the Well Program Atlas Sheet Grid for New Jersey to create this new data layer.
- Source_Information:
-
- Source_Scale_Denominator: 63360
- Type_of_Source_Media: paper
- Source_Citation_Abbreviation: NJ Atlas Sheets
- Source_Contribution: Atlas Grid based on these sheets
- Source_Time_Period_of_Content:
-
- Source_Currentness_Reference: ground condition
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 1886
- Source_Citation:
-
- Citation_Information:
-
- Originator:
-
Division of Resource Development, Bureau of Geology and Topology, C.C Vermuele (ed.), state geologist
- Publication_Date: 1886
- Title: New Jersey Atlas Sheets
- Edition: 1886
- Geospatial_Data_Presentation_Form: map
- Publication_Information:
-
- Publication_Place: New Jersey
- Publisher:
-
Division of Resource Development, Bureau of Geology and Topology, C.C Vermuele (ed.), state geologist
- Other_Citation_Details:
-
Revisions done by subsequent geologists from the 1940's through the 1970's. Note, the latitude and longitude grid on each sheet has not changed, but some of the topographic information was updated in some of these revisions.
- Source_Information:
-
- Source_Scale_Denominator: 63360
- Type_of_Source_Media: unknown
- Source_Citation_Abbreviation: NJ Rectangular Coordinate
- Source_Contribution: Atlas Grid based on this Coordinate system.
- Source_Time_Period_of_Content:
-
- Source_Currentness_Reference: ground condition
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: Unknown
- Source_Citation:
-
- Citation_Information:
-
- Originator: Unknown
- Publication_Date: Unknown
- Publication_Time: Unknown
- Title: New Jersey Rectangular Coordinate System
- Edition: Unknown
- Geospatial_Data_Presentation_Form: Unknown
- Publication_Information:
-
- Publication_Place: New Jersey
- Publisher: Unknown
- Cloud_Cover: 0
- Spatial_Data_Organization_Information:
-
- Direct_Spatial_Reference_Method: Vector
- Point_and_Vector_Object_Information:
-
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: G-polygon
- Point_and_Vector_Object_Count: 2088
- Spatial_Reference_Information:
-
- Horizontal_Coordinate_System_Definition:
-
- Planar:
-
- Map_Projection:
-
- Map_Projection_Name: Transverse Mercator
- Transverse_Mercator:
-
- Scale_Factor_at_Central_Meridian: 0.999900
- Longitude_of_Central_Meridian: -74.500000
- Latitude_of_Projection_Origin: 38.833333
- False_Easting: 492125.000000
- False_Northing: 0.000000
- Planar_Coordinate_Information:
-
- Planar_Coordinate_Encoding_Method: Coordinate Pair
- Coordinate_Representation:
-
- Abscissa_Resolution: 0.002048
- Ordinate_Resolution: 0.002048
- Planar_Distance_Units: survey feet
- Geodetic_Model:
-
- Horizontal_Datum_Name: North American Datum of 1983
- Ellipsoid_Name: Geodetic Reference System 80
- Semi-major_Axis: 6378137
- Denominator_of_Flattening_Ratio: 298.257
- Vertical_Coordinate_System_Definition:
-
- Altitude_System_Definition:
-
- Altitude_Resolution: 1.000000
- Altitude_Encoding_Method:
-
Explicit elevation coordinate included with horizontal coordinates
- Entity_and_Attribute_Information:
-
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: NJDEP.ATLAS2X2M
- Entity_Type_Definition: 2 minute by 2 minute atlas grid
- Entity_Type_Definition_Source: NJDEP
- Attribute:
-
- Attribute_Label: OBJECTID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: RECTANGLE
- Attribute_Definition: Rectangle identification number
- Attribute_Definition_Source: NJDEP
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: unique
- Attribute:
-
- Attribute_Label: SHAPE
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Attribute:
-
- Attribute_Label: SHAPE.AREA
- Attribute_Definition: Shape area
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: unique
- Attribute:
-
- Attribute_Label: SHAPE.LEN
- Attribute_Definition: Shape length
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: unique
- Distribution_Information:
-
- Resource_Description: Downloadable Data
- Distribution_Liability:
-
This organization provides the geographic data "as is". This organization makes no guarantee or warranty concerning the accuracy of information contained in the geographic data. Also, this organization makes no warranty either expressed or implied, regarding the condition of the product or its fitness for any particular purpose. The burden for determining fitness for use lies entirely with the user. Although these files have been processed successfully on computers at this organization, no warranty is made by this organization regarding the use of these data on any other system, nor does the fact of distribution constitute or imply any such warranty. See also "Use Constraints" for additional distribution and/or data use requirements.
- Standard_Order_Process:
-
- Digital_Form:
-
- Digital_Transfer_Information:
-
- Format_Name:
-
DEP distributes ESRI .SHP and/or GDB. Some data may be NJ GeoWeb "display only" layers.
- Format_Version_Number: latest version
- File_Decompression_Technique: WinZip
- Digital_Transfer_Option:
-
- Online_Option:
-
- Computer_Contact_Information:
-
- Network_Address:
-
- Network_Resource_Name: https://www.nj.gov/dep/gis
- Network_Resource_Name: https://www.nj.gov/dep/gis/geowebsplash.htm
- Offline_Option:
-
- Offline_Media: None
- Recording_Format: None
- Fees: None
- Ordering_Instructions:
-
All available NJDEP public GIS data can be downloaded for free. Some data shown in NJGeoWeb application may not yet be available for download due to various data or distribution issues. Please email gisnet@dep.nj.gov with any data distribution questions.
- Custom_Order_Process:
-
The NJDEP may distribute GIS data in a variety of formats, such as the ESRI shapefile and/or various versions of the file geodatabase format. The data also may be available for viewing on various profiles of the NJ GeoWeb online mapping application.
Note: Some older NJDEP data may not contain .prj files due to distribution procedures at that time. If download does not contain a .prj, please download from:
https://www.nj.gov/dep/gis/njsp83.zip
Please rename .prj to the name of the downloadable filename. (for example: If Head of Tides filename is HOT.shp, please rename .prj to HOT.prj). This allows ESRI software to recognize the projection information.
- Distributor:
-
- Contact_Information:
-
- Contact_Organization_Primary:
-
- Contact_Organization: NJDEP/DOIT/Bureau of GIS
- Contact_Person: GIS Help Desk
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 401 East State Street
- City: Trenton
- State_or_Province: NJ
- Postal_Code: 08625
- Contact_Voice_Telephone: (609) 777-0672
- Contact_Facsimile_Telephone: (609) 292-7900
- Contact_Electronic_Mail_Address: gisnet@dep.nj.gov
- Metadata_Reference_Information:
-
- Metadata_Date: 20020306
- Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
- Metadata_Standard_Version: FGDC-STD-001-1998
- Metadata_Time_Convention: local time
- Metadata_Extensions:
-
- Online_Linkage: https://www.esri.com/metadata/esriprof80.html
- Profile_Name: ESRI Metadata Profile
- Metadata_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Organization: NJDEP/DOIT/BGIS
- Contact_Person: Lou Jacoby
- Contact_Position: GIS Specialist
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 401 East State Street, Box 428
- City: Trenton
- State_or_Province: New Jersey
- Postal_Code: 08625
- Contact_Voice_Telephone: (609) 777-0672
- Contact_Electronic_Mail_Address: gisnet@dep.nj.gov
Generated by mp version 2.9.12 on Thu Dec 06 09:20:10 2018