Department of Transportation

Overview

The New Jersey Department of Transportation (NJDOT) issues these Design Document Change Announcements:

Baseline Document Change (BDC)

Announcements are notices that a Baseline Document has been modified in part or in whole. A Baseline document is defined as any official document that has gone through an initial approval process and was approved for use as intended. A BDC is an alteration to or rewriting of any officially approved document. New documents are also announced with a BDC.

Corrective Action Notices (CAN)

Notices that identify and address problems that may lead to additional costs, impact project schedules, or may be systemic in nature. They include a corrective action plan designed to eliminate the possibility of a recurrence. When these changes alter any Baseline Document, a Baseline Document Change (BDC) Announcement follows.

Quality Improvement Advisories (QIA)

Advisories that notify of problems that have occurred. They include possible solutions and lessons learned. Other uses include notification of efforts to minimize impacts to the project delivery schedule as well as avoiding unanticipated costs associated with project changes.

Document Codes:
D   - Construction Detail PR - Procedure
MB - Design Manual, Bridge S   - Specification
MR - Design Manual, Roadway T   - Other
Implementation Codes are available in BDC03T-06, and the Standard Distribution procedure is available in BDC03T-04.

BDC/CAN/QIA Number and Description
2022
08/03/2022 BDC22S-10Maximum Work Zone Limits - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subpart 108.07.01. See the updated Standard Inputs
08/01/2022 BDC22S-07Traffic Control Truck with Mounted Crash Cushions - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subpart 159.03.02. See the updated Standard Inputs
07/20/2022 BDC22D-01Inlet Type B and D Replacement in Concrete Barrier Curb - Addition of CD-602-5A and CD-602-5B to the Standard Construction Details 2016, Roadway. See the updated Attachment (pdf 2.4m) and the updated CADD Support Webpage for the CADD.
07/13/2022 BDC22MR-01Temporary Pavement Marking Tape - Revision to the 2015 Roadway Design Manual, Subsection 14.6. See the Attachment (pdf 106k) and the updated Roadway Design Manual (pdf 38m).
07/13/2022 BDC22S-06 Temporary Pavement Marking Tape - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subpart 159.03.03, 159.03.05, and 912.04.02. See the updated Standard Inputs
07/07/2022 CAN 091 Removal of Lead Service Lines Within NJDOT Project Limits
06/22/2022 BDC22S-03 Repairing HMA Pavement - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subpart 401.03.03 and Subsection 401.04. See the updated Standard Inputs
06/02/2022 BDC21D-01Compressive Barrier Summary Tables - Revision to CD-159-10 and CD-611-1 of the Standard Construction Details 2016, Roadway. See the updated Attachment and the CADD Support Webpage for the CADD.
06/02/2022 BDC21MR-01 Crash Cushion MASH Compliance - Revisions to “Section 9 – Crash Cushions” of the Roadway Design Manual, 2015. See the Attachment (pdf 2.3m) and the updated Roadway Design Manual (pdf 38m).
06/02/2022 BDC21S-10 Permanent Compressive Crash Cushions - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subpart 611.03.02. See the updated Standard Inputs
05/27/2022 BDC22S-05 Clearing Site - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subparts 201.03.01 and 201.03.02. See the updated Standard Inputs
05/13/2022 BDC22S-04 Asphalt Binder - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subparts 159.02.01 and 401.02.01, & Section 902, and the 2019 Standard Inputs, Subsection 65X.02. See the updated Standard Inputs
05/12/2022 BDC21S-20 Utility Services - Revision to the 2019 Standard Specifications for Road and Bridge Construction and the 2019 Standard Inputs, Subpart 701.03.15. See the updated Standard Inputs
04/22/2022 BDC22S-01 Traffic Control Truck - Revision to the 2007 and 2019 Standard Specifications for Road and Bridge Construction, Subpart 159.03.02 and Subsection 1001.03. See the updated 2019 Standard Inputs and 2007 Standard Inputs.
04/14/2022 BDC21D-07 Typical Pavement Markings - Addition of Construction Detail Sheets CD-610-8 through CD-610-14 to the Standard Construction Details 2016, Roadway. See the updated Attachment and the CADD Support Webpage for the CADD.
04/05/2022 CAN 090Design Forces for Alternate Foundation Design of NJDOT Sign and DMS Support Structures.
03/29/2022 BDC21T-01 Aerial Photogrammetry and Laser Scanning - Revisions to the Survey Manual, 2014. See the updated Attachment.
03/21/2022 BDC21D-06 Revisions to Construction Barrier Curb for MASH Compliance - Revision to CD-159-3, CD-159-4, CD-159-5, and TCD-2 of the Standard Construction Details 2016, Roadway. See the updated Attachment and the CADD Support Webpage for the CADD.
03/21/2022 BDC21MR-03 Revisions to Construction Barrier Curb for MASH Compliance - Revisions to “Section 14 – Subsection 14.8.3 Traffic Control Plans and Details” of the Roadway Design Manual, 2015. See the updated Attachment and the updated Roadway Design Manual.
03/21/2022 BDC21S-13 Revisions to Construction Barrier Curb for MASH Compliance - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subsection 913.04. See the updated Standard Inputs.
03/4/2022 BDC21S-16 State Funded Project Attachment 1, 2 & 3 - Revision to the 2019 Standard Inputs, State Funded Project Attachment 1, 2 & 3. See the updated Standard Inputs.
01/21/2022 BDC21S-15 Rumble Strips - Revision to the 2019 Standard Specifications for Road and Bridge Construction, Subpart 610.03.07. See the updated Standard Inputs.
01/20/2022 BDC21S-19 – Micro-Milling and Profile Milling - Revision to the 2019 Standard Specifications for Road and Bridge Construction and 2019 Standard Inputs, Subpart 401.03.01. See the updated Standard Inputs.


Last updated date: July 27, 2022 10:45 AM